Adding a non-WiFi Mitsubishi AC to Home Assistant

T1Covered by 1 source · first reported by Raspberry Pi / Arduino / Adafruit at 28 Sept, 20:37 UTC

A Medium post walks through putting a ducted Mitsubishi air conditioner on Home Assistant without Mitsubishi’s own WiFi adapter. The unit, an SEZ-M60DA2 from around 2022, is run by a wired wall thermostat with no network connection at all. The trick is the CN105 service port on the indoor unit’s…

Sources

• T1Adding a non-WiFi Mitsubishi AC to Home AssistantRaspberry Pi / Arduino / Adafruit28 Sept, 20:37