Raspberry Pi Pico (W, USB-C variant) Snap-Together Case #3DThursday #3DPrinting

T1Covered by 1 source · first reported by Raspberry Pi / Arduino / Adafruit at 15 Oct, 06:00 UTC

thomashack shares: A thin two-part snap-together case (54×24×6mm) for a third-party Pico W board with non-standard dimensions of 51.50×21.0mm. Openings for the two on-board buttons; GPIO pins fully enclosed. 0.16mm layer, 2 walls, 15% infill, ~16-min print, ~5g PLA. CAVEAT: designed for a specific…