Build a 10.1-inch Home Assistant panel with an ESP32-P4

T1Covered by 1 source · first reported by Raspberry Pi / Arduino / Adafruit at 14 Oct, 20:48 UTC

Julian Horsey at Geeky Gadgets writes up a build from Techiesms that turns an ESP32-P4 module into a wall-mounted Home Assistant control panel. The hardware is a 10.1-inch TFT LCD with a 1200×800 capacitive touchscreen that handles up to five touch points. The ESP32-P4 behind it has a dual-core 400…

Sources

• T1Build a 10.1-inch Home Assistant panel with an ESP32-P4Raspberry Pi / Arduino / Adafruit14 Oct, 20:48