Heltec V4 Meshtastic LoRa GPS Rugged Case #3DThursday #3DPrinting

T1Covered by 1 source · first reported by Raspberry Pi / Arduino / Adafruit at 01 Oct, 05:00 UTC

Alex_B_4854992 shares: The original case design that started it all for the Heltec V4 LoRa board. Rugged form factor with room for 2× 18650 cells and integrated 1S 9A BMS. Assembly: 6× M3 heat-set inserts, 1× 2.9mm light pipe, 10× M3×6 hex socket head screws, 2× M3×10 countersunk screws, 1× slide…

Sources

• T1Heltec V4 Meshtastic LoRa GPS Rugged Case #3DThursday #3DPrintingRaspberry Pi / Arduino / Adafruit01 Oct, 05:00